PLANET ICA-W8100 - Manual (Page 67)

Wireless Cube Fish-Eye IP Camera
ICA-W8100
67
Appendix A: PING IP Address
The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP
address is accessible by sending a packet to the specific address and waiting for a reply. It’s also
a very useful tool to confirm the installation of Internet camera, or if the IP address conflicts with
any other device over the network.
If you want to make sure the IP address of Internet camera is right, utilize the PING command as
follows:
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device that conflicts with the IP address of Internet camera, you
also can utilize the PING command but you must disconnect the Internet camera from the network
first.