PLANET VIP-281SW - Manual (Page 25)

Advanced Settings
These settings are only for more technically advanced users who have a sufficient knowledge about
wireless LAN. These settings should not be changed unless you know what effect the changes will
have on your Access Point.
- 25 -
The short of Wi-Fi Multi-Media, it will enhance the data transfer
performance of multimedia contents when they’re being transferred
over wireless network.
WMM
Default : Enable (Unavailable)
The Data Rate is the rate of data transmission for 802.11b/g/n
clients. The Router will use the highest possible selected
transmission rate to transmit the data packets.
Default : Auto
Data Rate
Default : Auto
Associated Clients To show the MAC address, transmission, reception packet counters
and encrypted status for each associated wireless client.
When set at Client mode, it provides wireless LAN to connect to a
MAC address.
Enable Mac Clone
Default : Disable
Universal Repeater is a technology used to extend wireless
coverage.
Enable Universal
Repeater Mode
Default : Disable
Click on “Enable Universal Repeater Mode”; In the “SSID of
Extended Interface”, enter the SSID of the wireless router that you
want to extend.
SSID of Extended
Interface
Default : Null