PLANET VIP-281SW - Manual (Page 28)

- WEP
When you select the 128 or 64 bit WEP key security, please select one WEP key to be used and input
26 or 10 hexadecimal (0, 1, 2…8, 9, A, B…F) digits.
- WPA
When select the WPA function, the Wireless user must authenticate to this router first to use the
Network service. RADIUS Server IP address or the 802.1X server’s domain-name.
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits
If ASCII, the length of pre-share key is from 8 to 63.
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the
- 28 -
Select SSID If assigned multiple AP feature, you could choose the SSID that want to
setup encryption function.
Select the data privacy algorithm you want. Enabling the security can
protect your data while it is transferred from one station to another.
Encryption
Default : Disable
Check Box was used to switch the function of the 802.1X. When the
802.1X function is enabled, the Wireless user must authenticate to this
router first to use the Network service.
802.1x Authentication
Default : Uncheck