PLANET VIP-281SW - Manual (Page 44)

- SIP Advanced
- 44 -
Set local SIP listening port. SIP Port
Default : 5060
Set RTP port for sending voice data. Media Port
Default : 9000
Select DTMF Relay to be In band, RFC 2833, or SIP INFO. DMTF Relay
Default : Inband
If user select DTMF as RFC 2833 type, here can modify RFC
2833 payload type.
RFC2833 Payload Type
Default : 96
If user select DTMF as SIP INFO type, here can modify SIP
INFO duration. Router will send out DTMF as this duration.
SIP INFO Duration (ms)
Default : 250
Check to enable Call Waiting function. Call Waiting
Default : Enable
Check to enable call waiting caller ID function. If this function is
enabled, caller ID will display when having waiting call. Please
note that your phone set should also support such function.
Call Waiting Caller ID
Default : Disable
Check to enable Reject Direct IP Call. If this function is enabled,
Router will to reject the incoming peer to peer call.
Reject Direct IP Call
Default : Disable