PLANET VIP-281SW - Manual (Page 31)

Site Survey
This page provides tool to scan the wireless network. If any Access Point or IBSS is found, you could
choose to connect it manually when client mode is enabled.
WPS Settings
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients
and this wireless router. You don’t have to select encryption mode and input a long encryption pass
phrase every time when you need to setup a wireless client, you only have to press a button on
wireless client and router, and the WPS will do the rest for you.
- 31 -
This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN code. If
you want to use PBC, you have to push a specific button on the wireless client to start WPS mode, and
switch this wireless router to WPS mode too. You can push RET/WPS button of this wireless router, or
click ‘Start PBC’ button in the web configuration interface to do this. If you want to use PIN code, you
can see the setup as below.