Figure 9 manually assign ip to pc – PLANET WNAP-C3220 User Manual
Page 19
Advertising
User’s Manual of WNAP-C3220
- 19 -
Summary:
Set up the TCP/IP Protocol for your PC.
Configure the network parameters. The IP address is 192.168.1.xxx ("xxx" is any number
from 2 to 254), Subnet Mask is 255.255.255.0.
1
Select Use the following IP address radio button.
2
If the AP's LAN IP address is 192.168.1.1, enter IP address 192.168.1.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
Figure 9 Manually assign IP to PC
Now click OK to save your settings.
Now, you can run the Ping command in the command prompt to verify the network connection
between your PC and the AP. The following example is in Windows XP OS. Please follow the steps
below:
Advertising