PLANET WNAP-C3220 - Manual (Page 43)

User’s Manual of WNAP-C3220
- 43 -
Basic Data Rates from the drop-down menu.
Here, default value is (1-2-5.5-11Mbps…). It is recommended not to
modify the default value.
Beacon Interval The frequency interval of the beacon is a packet broadcast by an AP to
synchronize a wireless network.
The default value is 100 ms.
Fragment Threshold The fragmentation threshold defines the maximum transmission packet
size in bytes. The packet will be fragmented if the arrival is bigger than
the threshold setting.
The default size is 2346 bytes.
RTS Threshold RTS stands for “Request to send”. This parameter controls what size
data packet the frequency protocol issues to RTS packet. If the device
works in SOHO, do not modify the default value.
TX Power Set the wireless output power level.
The default value is 100.
WMM Capable To enhance wireless multimedia transfer performance (0n-line video
and voice). If you are not clear about this, enable it.
APSD Capable It is used for auto power-saved service.
The default is disabled.
The Limited Clients Limit the total number of the wireless clients.
The maximum is 20, and the default value is 10.
Wireless LED Turn on or turn off the Wireless LED.
The default is On.