PLANET WNAP-C3220 - Manual (Page 37)

User’s Manual of WNAP-C3220
- 37 -
54Mbps.
11b/g/n Mixed Mode Allow 11b/g/n-compliant client device to
connect with the AP with auto- negotiation
speed. The maximum speed is 300Mbps.
SSID SSID (Service Set Identifier) is the unique name of the wireless
network. It is recommended to modify this name for wireless client to
recognize wireless signals.
Broadcast(SSID) When you select “Disable SSID broadcast”, AP will not broadcast its
own SSID number.
If there is a wireless connection request, you need to input SSID
number manually.
BSSID Basic Service Set Identifier of wireless network. In IEEE802.11, BSSID
is the MAC address of wireless access point.
WLAN Isolation The access control feature based on wireless MAC address.
When this feature is enabled, each of your wireless clients will be in its
own virtual network and will not be able to communicate with each
other. This feature is to isolate the communication of wireless clients
connected with different AP.
Channel Specify the effective channel (from 1 to 13\Auto) of the wireless
network.
Operation Mode Choose this according to the wireless mode(s) used in your network.
Mixed Mode - Select this if the wireless clients in your network use
different wireless modes (for example, IEEE 802.11b/g and IEEE
802.1n modes)
Green Mode - Select this if the wireless clients in your network use only
one type of wireless mode (for example, IEEEE 802.11 n only)
Channel Bandwidth Select the proper channel bandwidth to improve the wireless
performance. 20M bandwidth can improve the anti-jamming ability of
the wireless device. 40M bandwidth can improve the flux of 11N client.
Guard Interval This function is recommended for it will increase the data capacity by
reducing the guard interval time.
Reverse Direction
Grant(RDG)
Disable or enable reserve direction grant.
Default is enabled.
Extension Channel To increase data throughput of wireless network, the extension channel
range is used in 11n mode.
Aggregation MSDU The data rate of your AP except wireless client mode could be
enhanced greatly with this option enabled; however, if your wireless
clients don’t support MSDU aggregation, it is not recommended to
enable it.