PLANET NVR-3250 - Manual (Page 14)

14
English
2.1 Rack Mounting
To install the NVR-3250 in a 19-inch standard rack, please follows the instructions
described below.
Step1: Place the NVR-3250 on a hard flat surface, with the front panel positioned
towards the front side.
Step2: Attach the rack-mount bracket to each side of the NVR-3250 with supplied
screws attached to the package.
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would
invalidate the warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the NVR-3250, use suitable screws to
securely attach the brackets to the rack,