PLANET NVR-3250 - Manual (Page 71)

6.5.3 Maintenance
“Maintenance” provides functions for users to:
• Reboot the NVR when necessary
• Reboot cameras directly from the NVR
• Perform Firmware Upgrade
• Backup the NVR’s settings to a local hard drive
• Restore the NVR’s settings from a previously saved configuration file
• Reset the NVR’s settings to their factory default values
Reboot the NVR
Reboot NVR-1610 after you upload a new firmware. You would need to manually reboot the system for
the new firmware to take effect. Such process would prevent a recording from getting interrupted
because the system would not automatically reboot itself after the new firmware is loaded onto the
recorder.
Simply click “Restart” to begin the reboot process and confirm the action.
The restart process should be displayed and you should be prompted back to the “Maintenance” page
after it is complete.
Firmware Upgrade
71