PLANET NVR-3250 - Manual (Page 56)

56
6.2.4 PTZ Preset Sequence
Once you have multiple preset points defined for a camera, it is convenient for monitoring to set up the
sequencing viewing among those preset point and let the recorder automatically switch between them
for you.
To configure preset sequence for a camera,
1.” select a camera from the “Camera” drop-down menu. The available preset points should be listed in
“Camera Presets” section.
2. Pick the ones you like for sequence viewing and press the “->” button to move them to the “Adjust
Position” section, then use the up and down buttons to adjust their sequences.
3. Finally, select a dwell time from the drop-down menu and click “Apply” to save the configuration.