PLANET NVR-3250 - Manual (Page 64)

If you wish to edit/remove/enable/disable an FTP server, click to highlight one from the profile list and
choose the corresponding action button.
Configuring an SMTP server
1. Enter the hostname or the IP address of the SMTP server.
2. Enter the port of the SMTP server.
3. Specify the sender’s name in the “Sender’s name” field.
4. Enter the sender’s e-mail address.
5. Check “Enable Authentication” and enter the username and password of the SMTP server and it
requires authentication.
6. Click “Apply” to save the configuration.
6.3.4 Event Triggers
We have finished defining how an event will be triggered and which servers will be receiving notifications
in the previous two sections, now we can finish up the event configuration by setting.
.Which channels will have event trigger function enabled.
.What is considered to be an event.
64