PLANET NVR-3250 - Manual (Page 69)

6.4.2 Schedule Recording
Here you can define the time range of the schedule recording for all channels.
To configure a schedule recording:
1. Use the “Camera” drop-down menu and select a camera first.
2. You can use the schedule table to set the time range. Click the cell boxes then move the curser
horizontally lets you set what hours to perform recording during a day. Click and move vertically lets you
set what days to perform recording at a specific time.
* Each cell box represents 15 minutes of time. Click one or more boxes to omit consecutive recording.
3. You can also use the “Quick Configuration” to define recording time range instead of clicking cell box
one by one on the time table. Simply check what days you would like to perform recording and specify
the recording duration by either choosing “All Day” or enter a start and end time for specific recording
duration.
4. Select the “Copy to” option if you would like to set the same recording schedule to another camera.
69