Select the slot number for the module, To change the slot number – ProSoft Technology MVI56-BSAPS User Manual
Page 16
MVI56-BSAPS ♦ ControlLogix Platform
Start Here
Bristol Babcock Serial Slave Module
Page 16 of 83
ProSoft Technology, Inc.
September 22, 2008
5
On the Connected To Go Online dialog box, click the General tab. This tab
shows information about the processor, including the Revision (firmware)
version. In the following illustration, the firmware version is 11.32
1.7.2 Select
the
Slot
Number for the Module
The sample application is for a module installed in Slot 1 in a ControlLogix rack.
The ladder logic uses the slot number to identify the module. If you are installing
the module in a different slot, you must update the ladder logic so that program
tags and variables are correct, and do not conflict with other modules in the rack.
To change the slot number
1
In the Controller Organization list, select the module [1] 1756-MODULE
MVI56, and then click the right mouse button to open a shortcut menu.
2
On the shortcut menu, choose Properties. This action opens the Module
Properties dialog box.