Connect your pc to the module – ProSoft Technology MVI56-BSAPS User Manual
Page 20
Advertising
MVI56-BSAPS ♦ ControlLogix Platform
Start Here
Bristol Babcock Serial Slave Module
Page 20 of 83
ProSoft Technology, Inc.
September 22, 2008
1.9
Connect your PC to the Module
With the module securely mounted, connect your PC to the
Configuration/Debug
port using an RJ45-DB-9 Serial Adapter Cable and a Null
Modem Cable.
1
Attach both cables as shown.
2
Insert the RJ45 cable connector into the Configuration/Debug port of the
module.
3
Attach the other end to the serial port on your PC or laptop.
Advertising