ProSoft Technology MVI56-BSAPS - Manual (Page 68)

MVI56-BSAPS ♦ ControlLogix Platform Reference
Bristol Babcock Serial Slave Module
Page 68 of 83 ProSoft Technology, Inc.
September 22, 2008
RS-232: Null Modem Connection (Hardware Handshaking)
This type of connection is used when the device connected to the module
requires hardware handshaking (control and monitoring of modem signal lines).
RS-232: Null Modem Connection (No Hardware Handshaking)
This type of connection can be used to connect the module to a computer or field
device communication port.
Note: If the port is configured with the "Use CTS Line" set to 'Y', then a jumper is required between
the RTS and the CTS line on the module connection.