Switching to content playback mode – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual
Page 117
Advertising
117
Switching to Content Playback Mode
You need to switch to Content Playback mode to use its features.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Settings
menu and press
Enter
.
4.
Select the
Content Playback
setting and press
Enter
.
5.
Select the
On
setting and press
Enter
.
You see a confirmation prompt.
6.
Turn off the projector.
7.
Turn on the projector again to enable Content Playback mode.
8.
Press the
Home
button to make sure Content Playback mode is enabled.
Parent topic:
Advertising