Connecting to a video source for sound – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual
Page 37
37
2.
Connect the VGA connector to a
Computer
port on the projector.
3.
Tighten the screws on the VGA connector.
If your image colors appear incorrect, you may need to change the
Input Signal
setting in the projector's
Signal menu.
Parent topic:
Related references
Input Signal Settings - Signal Menu
Related tasks
Connecting to a Video Source for Sound
Connecting to a Video Source for Sound
You can play sound through the projector's speaker system if your video source has audio output ports.
If you are projecting video using a
Computer
port, connect the projector to the video source using an
optional stereo mini-jack audio cable.
Note:
If you connected your video source to the projector using an HDMI cable, the audio signal is
transferred with the video signal; you do not need an additional cable for sound.
1.
Connect the audio cable to your video source's audio-out ports.