Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual
Page 63
63
7.
Do one of the following depending on the network security setting you selected:
•
WPA2-PSK
or
WPA/WPA2-PSK
: Select
Complete
and follow the on-screen instructions to save
your settings and exit the menus. Skip the remaining steps.
•
WPA2-EAP
or
WPA/WPA2-EAP
: Select
EAP Method
and press
Enter
.
8.
Select your authentication protocol as the
EAP Type
setting.
9.
To import your certification, select the certificate type (either
Client Certificate
or
CA certificate
)
and press
Enter
.
Note:
You can also register a digital certificate from your web browser. Make sure to register just
once or the certificate may not install correctly.
10. Select
Register
and press
Enter
.
11. Follow the on-screen instructions to connect a USB storage device to the projector's
USB-A
port.
12. Press
Enter
to display the certificate list.
13. Select the certificate to import from the displayed list.
You see a message to enter the certificate password.
14. Enter a password and press
Enter
.
You see a completion message after the certificate is imported.