Resetting the lamp timer, Replacing the remote control batteries – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual
Page 189
Advertising
189
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement
message and to keep track of lamp usage correctly.
Note:
Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage
information.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Reset
menu and press
Enter
.
4.
Select
Reset Lamp Hours
and press
Enter
.
You see a prompt asking if you want to reset the lamp hours.
5.
Select
Yes
and press
Enter
.
6.
Press
Menu
or
Esc
to exit the menus.
Parent topic:
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Advertising