Transferring settings using a computer – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual
Page 150
150
you change the PJCONFDATA part of the file name, the projector may not be able to recognize the
file correctly.
6.
Turn off the other projector you want to transfer the settings to and unplug the power cord.
7.
Insert the flash drive into the
USB-A
port.
8.
Press and hold the
Menu
button on the remote control as you connect the power cord to the
projector's power inlet.
9.
When all of the projector lights turn on, release the
Menu
button.
All of the status lights flash to indicate that settings are transferring to the projector. When the lights
stop flashing, the projector enters standby mode.
Caution:
Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
10. Once the projector enters standby mode, remove the flash drive.
Parent topic:
Copying Menu Settings Between Projectors
Related references
Transferring Settings using a Computer
After saving projector settings to a computer, you can transfer them to another projector of the same
model.
Your computer must be running one of the following operating systems:
• Windows Vista
• Windows 7
• Windows 8.x
• Windows 10
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
• OS X 10.11.x