Solutions to projector power or shut-off problems, Solutions to remote control problems – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual

Page 206

Advertising
background image

206

Parent topic:

Solving Problems

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:

• Make sure the power cord is securely connected to the projector and to a working electrical outlet.

• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to

turn on the projector.

• If the projector's light source turns off unexpectedly, the A/V mute timer may be enabled. Select

Off

as

the

A/V Mute Timer

setting.

• If the power button on the remote control does not turn on the projector, check its batteries and make

sure the

Remote Receiver

setting is turned on in the projector's menu, if available.

• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord

and contact Epson.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Projector Setup Settings - ECO Menu
Projector Feature Settings - Settings Menu
Where to Get Help

Solutions to Remote Control Problems

If the projector does not respond to remote control commands, try the following solutions:

• Check that the remote control batteries are installed correctly and have power. If necessary, replace

the batteries.

• Make sure you are operating the remote control within the reception angle and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release

the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the

projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.

• If available, turn on one of the remote receivers in the projector's menu system, or check if all the

remote receivers were turned off.

Advertising