Setting up monitoring using snmp – Epson PowerLite U50 3700-Lumen WUXGA 3LCD Projector User Manual
Page 66
66
Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.
1.
Press the
Menu
button.
2.
Select the
Network
menu and press
Enter
.
3.
Select
Network Configuration
and press
Enter
.
4.
Select the
Notifications
menu and press
Enter
.
5.
Turn on the
SNMP
setting.
6.
Enter up to two IP addresses to receive SNMP notifications as the
Trap IP Address
setting, using 0
to 255 for each address field.
Note:
To enter the IP address using the numeric keys on the remote control, press and hold the
Num
button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x
is a number from 0 to 255).
7.
Select the
Others
menu and press
Enter
.
8.
If you want to use the Secure HTTP protocol to encrypt communication when using Web Control,
turn on the
Secure HTTP
setting and import the web server certificate using the
Web Server Cert.
setting.
9.
If available, select the
Priority Gateway
setting for your network.