Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard - Manual (Page 24)

24 PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
The following items appear only when Efficient Core Ratio is set to [Auto] , [Sync All
Cores] or [By Core Usage] .
Specific Efficient Core
Efficient Core Group0-1 Specific Ratio Limit
Configure a ratio limit for certain Efficient Cores. Use the <+> or <-> to adjust the
value.
Configuration options: [Auto] [8] - [120]
Efficient Core Group0-1 specific Voltage
Allows configuration of the voltage supply to the CPU cores. Setting to [Auto] will
scale voltage according to the applied CPU core ratio. Do not confuse this setting with
VCCIN (CPU Input voltage).
Configuration options: [Auto] [Manual Mode] [Adaptive Mode]
The following item appears only when Efficient Core Group0-1 specific Voltage is set to
[Manual Mode] .
CPU Core-0 Voltage Override / CPU Core-1 Voltage Override
Allows configuration of the CPU core voltage offset value. Use the <+> or <-> to
adjust the value. The values range from 0.600V to 1.700V with an interval of 0.001V.
Configuration options: [Auto] [0.00600] - [1.70000]
• You need to save the changes and reset the system for the changes to take effect.
• The following items appear only when Efficient Core Group0 specific Voltage /
Efficient Core Group1 specific Voltage is set to [Adaptive Mode] .
Offset Mode Sign
[+] Offset the CPU core voltage by a positive value.
[-] Offset the CPU core voltage by a negative value.
Additional Turbo Mode Efficient Group0 Voltage / Additional Turbo Mode
Efficient Group1 Voltage
Configure the amount of voltage fed to the CPU cores when running in the turbo
mode. Increase the voltage when configuring a High CPU core frequency. This
voltage will be affected by the offset value. Use the <+> or <-> to adjust the value. The
values range from 0.001 V to 1.920 V with an interval of 0.001 V.
Configuration options: [Auto] [0.00100] - [1.92000]
Efficient Core Group0 Offset / Efficient Core Group1 Offset
Configure the CPU core voltage offset value. Use the <+> or <-> to adjust the value.
The values range from 0.001 V to 0.999 V with an interval of 0.001 V.
Configuration options: [Auto] [0.00100] - [0.99900]
You need to save the changes and reset the system for the changes to take effect.