Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard User Manual
Page 39
PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
39
Dual Tau Boost
Allows you to enable or disable Dual Tau Boost feature. This is only applicable for
Desktop 35W/65W/12W sku. When DPTF is enabled this feature is ignored.
Configuration options: [Disabled] [Enabled]
IA AC Load Line
Allows you to set the AC loadline defined in mOhms. Use the <+> and <-> keys to
adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
IA DC Load Line
Allows you to set the DC loadline defined in mOhms. Use the <+> and <-> keys to
adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
IA CEP Enable
Allows you to enable or disable IA CEP (Current Excursion Protection) Support. Uses
pCode Mailbox Command 0x37, Sub-command 0x1. Set Databit2 to 1.
Configuration options: [Auto] [Disabled] [Enabled]
GT CEP Enable
Allows you to enable or disable GT CEP (Current Excursion Protection) Support. Uses
pCode Mailbox Command 0x37, Sub-command 0x1. Set Databit3 to 1.
Configuration options: [Auto] [Disabled] [Enabled]
SA CEP Enable
Allows you to enable or disable SA CEP (Current Excursion Protection) Support. Uses
pCode Mailbox Command 0x37, Sub-command 0x1. Set Databit3 to 1.
Configuration options: [Auto] [Disabled] [Enabled]
IA SoC Iccmax Reactive Protector
Configuration options: [Auto] [Disabled] [Enabled]
Inverse Temperature Dependency Throttle
Configuration options: [Auto] [Disabled] [Enabled]
IA VR Voltage Limit [Auto]
Voltage Limit (VMAX). This value represents the Maximum instantaneous voltage
allowed at any given time. Range is 0 - 7999mV. Uses BIOS VR mailbox command
0x8.
Configuration options: [Auto] [0] - [7999]
CPU DLVR Bypass mode support
Configuration options: [Auto] [Disabled] [Enabled]
Thermal Velocity Boost
TVB Voltage Optimizations
This service controls thermal based voltage optimizations for processors that
implement the Intel Thermal Velocity Boost (TVB) feature. This item is set to
[Enabled]
by default. Uses Overclocking Mailbox command 0x18/0x19.
Configuration options: [Auto] [Disabled] [Enabled]