Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard - Manual (Page 69)

PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual 69
6.15 Onboard Devices Configuration
The items in this menu allow you to change the onboard devices settings. Scroll down to
view the other BIOS items.
The settings and options of this menu may vary depending on your motherboard. Please
refer to the BIOS of your motherboard for the actual settings and options.
ErP Ready
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled] , all other PME options are switched off. RGB LEDs and
RGB/Addressable RGB Headers will also be disabled.
Configuration options: [Disabled] [Enabled (S4+S5)] [Enabled (S5)]
Power On By PCI-E
Allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or
other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC
Allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and
configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or
seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]
PCIe Bandwidth Bifurcation Configuration
[Auto] Run full PCIe X16 mode.
[X8/X8] Split up PCIEX16_1 that runs X16 into X8/X8.