Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard User Manual
Page 77
PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
77
AIO Pump Q-Fan Control
Allows you to set the AIO Pump operating mode.
[Auto Detect]
Detects the type of installed fan/pump and automatically switches
the control modes.
[DC Mode]
Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump.
[PWM Mode]
Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
AIO Pump Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting
[Manual]
, we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
The following items appear only when
AIO Pump Profile
is set to
[Standard]
,
[Silent]
,
[Turbo]
, or
[Manual].
AIO Pump Q-Fan Source
The assigned fan/pump will be controlled according to the selected temperature
source.
Configuration options: [CPU] [MotherBoard] [VRM] [Chipset] [T_Sensor] [Multiple
Sources]
AIO Pump Step Up
Step up allows you to adjust how quickly the fan rotation speed increases, with level 0
being an instantaneous change in speed. The higher the level, the slower the change
in speed, and may also result in less noise, but this will also cause slower heat
dissipation.
Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]
AIO Pump Step Down
Step down allows you to adjust how quickly the fan rotation speed decreases, with
level 0 being an instantaneous change in speed. The higher the level, the slower the
change in speed, and may also result in less noise, but this will also cause slower
heat dissipation.
Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]
AIO Pump Speed Low Limit
Allows you to set the lower speed limit for assigned fan/pump. A warning message will
appear when the limit is reached; the warning message will not appear if
[Ignore]
is
selected.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600
RPM]