Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard - Manual (Page 48)

48 PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
DRAM VDDQ Voltage
Power for the DRAM ICs’ VDD Data portion. Use the <+> or <-> to adjust the value. The
values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
Advanced Memory Voltages
IVR Transmitter VDDQ Voltage
Allows you to set the voltage for the internal transmitter voltage for the Memory
Controller. Use the <+> or <-> to adjust the value. The values range from 0.700V to
2.200V with an interval of 0.005V.
Configuration options: [Auto] [0.70000] - [2.20000]
Memory Controller Voltage
Allows you to set the voltage for the Memory Controller. Use the <+> or <-> to adjust
the value. The values range from 1.006V to 2.006V with an interval of 0.010V.
Configuration options: [Auto] [1.00600] - [2.00600]
MC Voltage Calculation Voltage Base
Allows you to set the base MC Voltage used for calculations. Use the <+> or <-> to
adjust the value. The values range from 0.700V to 2.200V with an interval of 0.005V.
Configuration options: [Auto] [0.70000] - [2.20000]
VDD Calculation Voltage Base
Allows you to set the base VDD Voltage used for calculations. Use the <+> or <-> to
adjust the value. The values range from 0.700V to 2.200V with an interval of 0.005V.
Configuration options: [Auto] [0.70000] - [2.20000]
PMIC Voltages
Configuration options: [Auto] [Sync All PMICs] [By per PMIC]
The following items appear only when PMIC Voltages is set to [Sync All PMICs] .
SPD HUB VLDO (1.8V)
Allows you to set the main power for the SPD Hub Logic. Default set to 1.8V. Use
the <+> or <-> to adjust the value. The values range from 1.700V to 2.000V with an
interval of 0.100V.
Configuration options: [Auto] [1.70000] - [2.00000]
SPD HUB VDDIO (1.0V)
Allows you to set the main power for the SPD Hub side-band interface. Default set to
1.0V. Use the <+> or <-> to adjust the value. The values range from 0.900V to 1.200V
with an interval of 0.100V.
Configuration options: [Auto] [0.90000] - [1.20000]
DRAM VDD Voltage
Allows you to set the power for the DRAM IC’s VDD portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
DRAM VDDQ Voltage
Allows you to set the power for the DRAM IC’s Data portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]