Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard - Manual (Page 76)

76 PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual
The following items appear only when Chassis Fan 1-5 Profile is set to [Manual].
Chassis Fan Point4 Temperature
When the temperature source is lower than the temperature of P4, the duty cycle will be
determined according to the P3-P4 and the temperature source. When the temperature
source is higher than the temperature of P4, the fan will operate at the duty cycle of P4.
Use the <+> or <-> keys to adjust the temperature.
Chassis Fan Point4 Duty Cycle (%)
When the temperature source is lower than the temperature of P4, the duty cycle will be
determined according to the P3-P4 and the temperature source. When the temperature
source is higher than the temperature of P4, the fan will operate at the duty cycle of P4.
Use the <+> or <-> keys to adjust the fan/pump duty cycle.
Chassis Fan Point3 Temperature
When the temperature source is lower than the temperature of P3, the duty cycle will be
determined according to the P2-P3 and the temperature source. When the temperature
source is higher than the temperature of P3, the fan will operate at the duty cycle of P3-
P4. Use the <+> or <-> keys to adjust the temperature.
Chassis Fan Point3 Duty Cycle (%)
When the temperature source is lower than the temperature of P3, the duty cycle will be
determined according to the P2-P3 and the temperature source. When the temperature
source is higher than the temperature of P3, the fan will operate at the duty cycle of P3-
P4. Use the <+> or <-> keys to adjust the fan/pump duty cycle.
Chassis Fan Point2 Temperature
When the temperature source is lower than the temperature of P2, the duty cycle will be
determined according to the P1-P2 and the temperature source. When the temperature
source is higher than the temperature of P2, the fan will operate at the duty cycle of P2-
P3. Use the <+> or <-> keys to adjust the temperature.
Chassis Fan Point2 Duty Cycle (%)
When the temperature source is lower than the temperature of P2, the duty cycle will be
determined according to the P1-P2 and the temperature source. When the temperature
source is higher than the temperature of P2, the fan will operate at the duty cycle of P2-
P3. Use the <+> or <-> keys to adjust the fan/pump duty cycle.
Chassis Fan Point1 Temperature
When the temperature source is lower than the temperature of P1, the fan will operate at
the duty cycle of P1. When the temperature source is higher than the temperature of P1,
the duty cycle will be determined according to P1-P2 and the temperature source. Use
the <+> or <-> keys to adjust the temperature.
Chassis Fan Point1 Duty Cycle (%)
When the temperature source is lower than the temperature of P1, the fan will operate at
the duty cycle of P1. When the temperature source is higher than the temperature of P1,
the duty cycle will be determined according to P1-P2 and the temperature source. Use
the <+> or <-> keys to adjust the fan/pump duty cycle.
Allow Fan Stop
This function allows the fan to run at 0% duty cycle when the temperature of the source is
dropped below the lower temperature.
Configuration options: [Disabled] [Enabled]