Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard - Manual (Page 49)

PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual 49
DRAM VPP Voltage
Allows you to set the power for the DRAM Activating Power Supply. Use the <+> or
<-> to adjust the value. The values range from 1.500V to 2.135V with an interval of
0.005V.
Configuration options: [Auto] [1.50000] - [2.13500]
DRAM VDD Switching Frequency
Allows you to set the switching frequency of DRAM VDD regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
DRAM VDDQ Switching Frequency
Allows you to set the switching frequency of DRAM VDDQ regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
DRAM VPP Switching Frequency
Allows you to set the switching frequency of DRAM VPP regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
DRAM Current Capability
Allows you to set the current capability for the switching regulators in Amps. Use
the <+> or <-> to adjust the value. The values range from 0.125A to 7.875A with an
interval of 0.125A.
Configuration options: [Auto] [0.12500] - [7.87500]
The following items appear only when PMIC Voltages is set to [By per PMIC] .
PMIC0-3 SPD HUB VLDO (1.8V)
Allows you to set the main power for the SPD Hub Logic. Default set to 1.8V. Use
the <+> or <-> to adjust the value. The values range from 1.700V to 2.000V with an
interval of 0.100V.
Configuration options: [Auto] [1.70000] - [2.00000]
PMIC0-3 SPD HUB VDDIO (1.0V)
Allows you to set the main power for the SPD Hub side-band interface. Default set to
1.0V. Use the <+> or <-> to adjust the value. The values range from 0.900V to 1.200V
with an interval of 0.100V.
Configuration options: [Auto] [0.90000] - [1.20000]
PMIC0-3 DRAM VDD Voltage
Allows you to set the power for the DRAM IC’s VDD portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
PMIC0-3 DRAM VDDQ Voltage
Allows you to set the power for the DRAM IC’s Data portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]