Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard User Manual

Page 47

Advertising
background image

PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual

47

Offset Voltage

Allows you to configure the CPU L2 voltage offset value. Use the <+> or <-> to adjust the

value. The values range from 0.001V to 0.999V with an interval of 0.001V.

Configuration options: [Auto] [0.00100] - [0.99900]

You need to save the changes and reset the system for the changes to take effect.

CPU System Agent Voltage

Allows you to configure the voltage for the CPU System Agent.

Configuration options: [Auto] [Manual Mode] [Offset Mode]

The following item appears only when

CPU System Agent Voltage

is set to

[Manual

Mode]

.

CPU System Agent Voltage Override

Allows you to configure the input voltage for the CPU by the external voltage regulator. Use

the <+> and <-> keys to adjust the value. The values range from 0.700V to 1.800V with an

interval of 0.001V.

Configuration options: [Auto] [0.70000] - [1.80000]

The following item appears only when

CPU System Agent Voltage

is set to

[Offset

Mode]

.

CPU System Agent Voltage Offset

Allows you to configure the CPU System Agent Voltage offset value. Use the <+> or <-> to

adjust the value. The values range from 0.001V to 0.999V with an interval of 0.001V.

Configuration options: [Auto] [0.00100] - [0.99900]

You need to save the changes and reset the system for the changes to take effect.

CPU Input Voltage

Allows you to configure the voltage for the CPU Input. Use the <+> or <-> to adjust the

value. The values range from 1.500V to 2.100V with an interval of 0.010V.

Configuration options: [Auto] [1.50000] - [2.10000]

High DRAM Voltage Mode

If this item is set to

[Disabled]

, the upper range for DRAM Voltage will be 1.435V. If this item

is set to

[Enabled]

, the upper range will be 2.070V. If enabled on non-supported DRAM, the

voltage will be lower than requested.

Configuration options: [Auto] [Disabled] [Enabled]

DRAM VDD Voltage

Power for the DRAM ICs’ VDD portion. Use the <+> or <-> to adjust the value. The values

range from 0.800V to 1.435V with an interval of 0.005V.

Configuration options: [Auto] [0.80000] - [1.43500]

Advertising