Asus ProZ790-CREATOR WIFI LGA 1700 ATX Motherboard - Manual (Page 73)

PRIME / ProArt / TUF GAMING Intel 700 Series BIOS Manual 73
Voltage and Current Monitor
CPU Core Voltage, 12V Voltage, 5V Voltage, 3.3V Voltage, Memory Controller
Voltage [x.xxx V]
The onboard hardware monitor automatically detects the voltage output through the
onboard voltage regulators. Select [Ignore] if you do not want to detect this item.
Q-Fan Configuration
Q-Fan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
The process may take 2 to 5 minutes. DO NOT shut down or reset your system during the
tuning process.
CPU Q-Fan Control
Allows you to set the CPU Q-Fan operating mode.
[Auto Detect]
Detects the type of installed fan/pump and automatically switches
the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
CPU Fan Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting [Manual] , we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75 ° C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
The following items appear only when CPU Fan Profile is set to [Standard] , [Silent] ,
[Turbo] , or [Manual].
CPU Fan Step Up
Step up allows you to adjust how quickly the fan rotation speed increases, with level 0
being an instantaneous change in speed. The higher the level, the slower the change
in speed, and may also result in less noise, but this will also cause slower heat
dissipation.
Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]
CPU Fan Step Down
Step down allows you to adjust how quickly the fan rotation speed decreases, with
level 0 being an instantaneous change in speed. The higher the level, the slower the
change in speed, and may also result in less noise, but this will also cause slower
heat dissipation.
Configuration options: [Level 0] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5]