HP Color LaserJet Pro M283fdw Multifunction Printer User Manual
Page 100
b.
Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer control panel. Press the
Enter
key on the computer keyboard. The EWS opens.
NOTE:
If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2.
Open the System tab.
3.
On the Device Information page, the default printer name is in the Device Description field. You can change
this name to uniquely identify this printer.
NOTE:
Completing the other fields on this page is optional.
4.
Click the Apply button to save the changes.
Manually configure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1.
From the Home screen on the printer control panel, touch the
Setup
button .
2.
Scroll to and touch the
Network Setup
menu.
3.
Touch the
IPv4 Config Method
menu, and then touch the
Manual
button.
4.
Use the keypad on the touchscreen to enter the IP address, and touch the
OK
button. Touch the
Yes
button
to confirm.
5.
Use the keypad on the touchscreen to enter the subnet mask, and touch the
OK
button. Touch the
Yes
button to confirm.
6.
Use the keypad on the touchscreen to enter the default gateway, and touch the
OK
button. Touch the
Yes
button to confirm.
88
Chapter 8 Manage the printer
ENWW