Shared voice/fax line – HP Color LaserJet Pro M283fdw Multifunction Printer User Manual
Page 84
c.
Select the
Fax Setup
menu.
d.
Select the
Basic Setup
menu.
e.
Select the
Answer Mode
setting.
f.
Select the
Automatic
option.
3.
Continue to
Step 3: Configure the fax time, date, and header on page 74
.
Shared voice/fax line
Follow these steps to set up the printer on a shared voice/fax line.
1.
Disconnect any devices that are connected to the telephone jack.
2.
Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall.
NOTE:
Some countries/regions might require an adapter to the telephone cable that came with the
printer.
NOTE:
On some printers, the fax port might be above the phone port. Refer to the icons on the printer.
3.
Remove the plug from the telephone line out port on the rear of the printer, and then connect a phone to
this port.
4.
Set the printer to answer fax calls automatically.
a.
Turn the printer on.
b.
From the control panel, open the
Setup
menu.
c.
Select the
Fax Setup
menu.
d.
Select the
Basic Setup
menu.
e.
Select the
Answer Mode
setting, and then select the
Automatic
option.
5.
Set the printer to check for a dial tone before sending a fax.
NOTE:
This prevents the printer from sending a fax while someone is on the telephone.
a.
From the control panel, open the
Setup
menu.
b.
Select the
Fax Setup
menu.
72
Chapter 7 Fax
ENWW