HP Color LaserJet Pro M283fdw Multifunction Printer - Manual (Page 152)

Check the send-fax resolution settings
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer
attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-error
options.
1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup
icon to open the menu.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Open the Fax Resolution menu.
Check the error-correction settings
Usually, the printer monitors the signals on the telephone line while it is sending or receiving a fax. If the printer
detects an error during the transmission and the error-correction setting is On , the printer can request that the
portion of the fax be resent. The factory-set default for error correction is On .
You should turn off error correction only if you are having trouble sending or receiving a fax, and you are willing
to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax
overseas or receive one from overseas, or if you are using a satellite telephone connection.
1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup
icon to open the menu.
2. Touch the Service menu.
3. Touch the Fax Service menu.
4. Touch the Error Correction button, and then touch the On button.
Check the fit-to-page setting
If the printer printed a fax job off the page, turn on the fit-to-page feature from the printer control panel.
NOTE: Make sure that the default paper size setting matches the size of the paper in the tray.
1. From the Home screen on the printer control panel, swipe until the Setup menu displays. Touch the Setup
icon to open the menu.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Touch the Fit to Page button, and then touch the On button.
140 Chapter 9 Solve problems ENWW