Step 3: configure the fax time, date, and header, Hp fax setup wizard – HP Color LaserJet Pro M283fdw Multifunction Printer User Manual
Page 86
5.
Configure the rings to answer setting on the printer.
a.
Turn the printer on.
b.
From the control panel, open the
Setup
menu.
c.
Select the
Fax Setup
menu.
d.
Select the
Basic Setup
menu.
e.
Select the
Rings to Answer
option.
f.
Use the numeric keypad on the printer control panel to set the number of rings, and then select
OK
.
6.
Set the printer to answer fax calls automatically.
a.
From the control panel, open the
Setup
menu.
b.
Select the
Fax Setup
menu.
c.
Select the
Basic Setup
menu.
d.
Select the
Answer Mode
setting, and then select the
Automatic
option.
7.
Set the printer to check for a dial tone before sending a fax.
NOTE:
This prevents the printer from sending a fax while someone is on the telephone.
a.
From the control panel, open the
Setup
menu.
b.
Select the
Fax Setup
menu.
c.
Select the
Advanced Setup
menu.
d.
Select the
Detect Dial Tone
setting, and then select the On button.
8.
Continue to
Step 3: Configure the fax time, date, and header on page 74
.
Step 3: Configure the fax time, date, and header
Configure the printer fax settings using one of the following methods:
●
HP Fax Setup Wizard on page 74
(recommended method)
●
Printer control panel on page 75
●
HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) on page 75
(if the software is
installed)
NOTE:
In the United States and many other countries/regions, setting the time, date, and other fax header
information is a legal requirement.
HP Fax Setup Wizard
Access the Fax Setup Wizard after
initial
setup and software installation by following these steps.
NOTE:
Some operating systems do not support the Fax Setup Wizard.
1.
Open the HP Printer Assistant.
74
Chapter 7 Fax
ENWW