HP Color LaserJet Pro M283fdw Multifunction Printer - Manual (Page 99)

Configure IP network settings
● Introduction
● Printer sharing disclaimer
● View or change network settings
● Rename the printer on a network
● Manually configure IPv4 TCP/IP parameters from the control panel
Introduction
Use the following sections to configure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and
not of the HP printer drivers. Go to Microsoft at www.microsoft.com .
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
1. Open the HP Embedded Web Server (EWS):
a. From the Home screen on the printer control panel, touch the Connection Information button
, and then touch the Network Connected button or the Network Wi-Fi ON button
to display the IP address or host name.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2. Click the Networking tab to obtain network information. Change settings as needed.
Rename the printer on a network
To rename the printer on a network so that it can be uniquely identified, use the HP Embedded Web Server.
1. Open the HP Embedded Web Server (EWS):
a. From the Home screen on the printer control panel, touch the Connection Information button
, and then touch the Network Connected button or the Network Wi-Fi ON button
to display the IP address or host name.
ENWW Configure IP network settings 87