NETGEAR GS308E 8-Port Gigabit Managed Switch - Manual (Page 31)

The VLAN Configuration and VLAN Membership sections display.
The previous figure is an example. Your switch might provide more or fewer ports.
9. In the VLAN Identifier
menu, select the VLAN.
10. Select the ports that you want to add to the VLAN by doing the following:
a. (Optional) In the
Group Operation
menu, select either
Select All
or
Remove
All
.
All ports are either added to the VLAN or removed from the VLAN.
b. Select or remove individual ports by selecting the check boxes that are associated
with the port numbers.
Note:
If ports are members of the same LAG, you must assign them to the same
VLAN.
c. Click the Apply
button.
Your settings are saved. In the VLAN Membership table, the ports display as
members of the VLAN.
11. To select ports for another VLAN, repeat Step 9 and Step 10.
User Manual 31 Use VLANS for Traffic
Segmentation
Gigabit Ethernet Smart Managed Plus Switches