NETGEAR GS308E 8-Port Gigabit Managed Switch - Manual (Page 34)

The login window opens.
4. Enter the switch password.
The default password is
password
. The password is case-sensitive.
The Switch Information page displays.
5. Select
VLAN > 802.1Q > Advanced > VLAN Configuration
.
The Advanced 802.1Q VLAN Status page displays.
6. If this is the first time that you are accessing the Advanced 802.1Q VLAN Status page
or if you are changing the VLAN assignment method, select the
Enable
radio button
and continue with Step 7.
Otherwise, see Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the OK
button.
The pop-up window closes.
8. Click the
Apply
button.
Your settings are saved.
The VLAN Identifier Setting table displays.
The previous figure is an example. Your switch might provide more or fewer ports,
all of which are members of VLAN 1 by default.
9. In the VLAN ID
field, enter a VLAN ID.
You can enter a VLAN ID from 1 to 4093.
10. Click the
Add
button.
The new VLAN is added to the VLAN Identifier Setting table.
After you create a new VLAN ID, use the VLAN membership option to add ports to
the VLAN. (Select
VLAN > 802.1Q > Advanced > VLAN Membership
. See also
Add Tagged or Untagged Ports to an 802.1Q-Based VLAN on page 35.)
User Manual 34 Use VLANS for Traffic
Segmentation
Gigabit Ethernet Smart Managed Plus Switches