NETGEAR GS308E 8-Port Gigabit Managed Switch - Manual (Page 68)

If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 16.
The login window opens.
4. Enter the switch password.
The default password is
password
. The password is case-sensitive.
To navigate to this page, select
System > Management > Switch Information
.
5. To change the switch device name, do the following:
a. In the Switch Name
field, enter a name of up to 20 characters.
b. Click the Apply
button.
Your settings are saved.
View or Clear the Port Statistics
For each switch port, you can view the bytes received, bytes sent, and cyclic redundancy
check (CRC) error packets.
To view or clear the port statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 16.
User Manual 68 Manage and Monitor the Switch
Gigabit Ethernet Smart Managed Plus Switches