NETGEAR GS308E 8-Port Gigabit Managed Switch - Manual (Page 47)

5. In the DHCP Mode
menu, select
Disable
.
The
IP Address
,
Subnet Mask
, and
Gateway Address
fields are enabled.
6. Enter the IP address, subnet mask, and gateway address.
7. Click the Apply
button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Switch IP Address
The ProSAFE Plus Utility runs on Windows-based computers. You can install the utility
to select additional options to manage and customize the switch for your network. Visit
netgear.com/support/product/PCU to download the utility.
To specify IP address settings for the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Smart Managed Plus Switches that the
utility discovers on the local network.
3. Select the switch.
If you do not see the switch, click the
REFRESH
button.
User Manual 47 Manage Network Settings
Gigabit Ethernet Smart Managed Plus Switches