NETGEAR GS308E 8-Port Gigabit Managed Switch - Manual (Page 9)

Status LEDs
This section describes the status LEDs for each switch model.
For information about the front panel and ports for your switch model, see the installation
guide for you model, which you can download by visiting
netgear.com/support/download/.
Models GS105Ev2, GS108Ev3, GS116Ev2, GS305E, and
GS308E LEDs
This section describes the LED designations of models GS105Ev2, GS108Ev3, GS116Ev2,
GS305E, and GS308E.
Table 2. Model GS105Ev2, GS108Ev3, GS116Ev2, GS305E, and GS308E LEDs on the front panel
Description LEDs
The switch is powered on and operating normally. Solid green Power LED
Power is not supplied to the switch. Off
Combined, these RJ-45 port LEDs indicate link, speed, and activity. Right port LEDs Left port LEDs
A valid 1 Gbps port link is established. Solid green Solid green
The port is transmitting or receiving packets at 1 Gbps. Blinking green Blinking green
A valid 100 Mbps port link is established. Off Solid green
The port is transmitting or receiving packets 100 Mbps. Off Blinking green
A valid 10 Mbps port link is established. Solid green Off
The port is transmitting or receiving packets 10 Mbps. Blinking green Off
No port link is established. Off Off
Model GS105PE LEDs
This section describes the LED designations of model GS105PE.
Ports 1 and 2 are PoE ports that can deliver PoE. Ports 3 and 4 are regular Ethernet
ports. Port 5 is a PoE PD port that must receive power from a PoE switch.
User Manual 9 Hardware
Gigabit Ethernet Smart Managed Plus Switches