4 - 5 connecting monitoring equipment, 4 - 6 using the built-in speaker, 4 - 7 adjusting the playback volume – Tascam Portacapture X6 32-Bit 6-Channel Multitrack Field Recorder User Manual

Page 19: 4 - 8 connecting computers and smartphones, 19 4 - connections, 4 - 8 connecting computers and smart- phones

Advertising
background image

TASCAM Portacapture X6

19

4 - Connections

4 - 5 Connecting monitoring equipment

To listen with an external monitoring system (powered monitor speakers
or an amplifier and speakers), connect it to the LINE OUT jack.
To listen with headphones, connect them to the (headphone) jack.
Depending on the settings, monitoring might not be possible until the
REC[

0

] button is pushed. See “Recording operation flow” on page 24

for details.

Powered monitor speakers or
amplifier and speakers

Headphones

LINE OUT jack

(headphone) jack

4 - 6 Using the built-in speaker

To listen to the playback sound through the built-in speaker, set the
GENERAL SETTINGS > I/O SETTINGS > SPEAKER item to ON.

NOTE

If anything is connected to the (headphone) jack, sound will not be
output from the speaker even if SPEAKER output is set to ON.

4 - 7 Adjusting the playback volume

Press +/– on the

(headphone/speaker) volume control to adjust the

volume output from the built-in speaker and (headphone) jack.

CAUTION

To listen to the playback sound through the built-in speaker, set the
GENERAL SETTINGS > I/O SETTINGS > SPEAKER item to ON. This is off
when shipped new from the factory.

NOTE

Sound will not be output through the speaker when the unit is
recording, in recording standby, in recording guide mode or when
headphones are connected.

4 - 8 Connecting computers and smart-

phones

The following functions can be used when connected by USB to a com-
puter (Windows/Mac) or smartphone.

o

Use the unit as a USB mic

o

Simultaneously record to a computer while recording on the microSD
card in the unit (backup recording)

o

Monitor sound from the computer

o

Use as a microSD card reader (only when connected to a computer)

NOTE

A USB cable must be prepared to connect this unit to a computer
(Windows/Mac) or smartphone. (see “USB cables (for communication
or data transmission)” on page 6)

Computer

USB cable

USB Type-C port

o

Stream live mixes of sounds playing back from a computer and input
through mics connected to this unit (loopback function)

Music

Mics

Music

Mics

Mics (con-
nected or
built-in)

Computer

See “USB connection” on page 47 for details about use.

Advertising