Tascam Portacapture X6 32-Bit 6-Channel Multitrack Field Recorder - Manual (Page 24)

24
TASCAM Portacapture X6
6 - Recording apps
6 - 1 Recording app overview
Recording pause function
This unit has a recording pause function that causes it to start monitoring the input signal when the REC [ 0 ] button is pressed. This function can be used
with all recording apps.
A recording can be started and paused repeatedly without stopping, allowing it to be saved as a single file.
The recording pause function is off when shipped new from the factory.
When the recording pause function is off, the input signal is always monitored when a recording app is active.
When the recording pause function is on, the input signal is only monitored when the recording guide function is active, recording is paused or recording
is in progress.
The recording pause function can be set with the GENERAL SETTINGS screen > REC SETTINGS page > REC PAUSE item.
NOTE
When the recording pause function is activated monitoring of input signals is disabled when recording is stopped, reducing power consumption.
Recording operation flow
Depending on the RECORDING GUIDE 1 and REC PAUSE on/off settings, pressing buttons will have the following effects.
RECORDING GUIDE function on REC PAUSE function off
Monitoring input signal
Stopped
REC indicator unlit
Recording guide
active
(only available in
MANUAL app)
REC indicator
blinking
Recording
REC indicator lit
RECORDING GUIDE function on REC PAUSE function on
Monitoring input signal
Stopped
REC indicator unlit
Recording guide
active
(only available in
MANUAL app)
REC indicator
blinking
Recording paused
REC indicator
blinking
Recording
REC indicator lit
RECORDING GUIDE function off REC PAUSE function off
Monitoring input signal
Stopped
REC indicator unlit
Recording
REC indicator lit