Tascam Portacapture X6 32-Bit 6-Channel Multitrack Field Recorder - Manual (Page 60)

60
TASCAM Portacapture X6
18 - Specifications
18 - 1 Specifications and rated values
Recorder specifications
Recording media
microSD cards (64 MB – 2 GB)
microSDHC cards (4 GB − 32 GB)
microSDXC cards (48 GB – 512 GB)
Recording/playback formats
WAV (BWF): 44.1/48/96kHz, 16/24-bit or 32-bit float
MP3: 44.1/48kHz, 128/192/256/320kbps
Number of channels
Input channels
4 channels maximum
Recording tracks
6 tracks maximum
Analog audio input ratings
Mic inputs (balanced)
Input jacks 3/4 (when INPUT SELECT set to MIC)
Connectors:
XLR-3-31 equivalent(1: GND, 2: HOT, 3: COLD)
(supports phantom power only when MIC input selected)
Input impedance: 2.2 kΩ or higher
Maximum input level: +2 dBu
Minimum input level: −75 dBu
Input jacks 3/4 (when INPUT SELECT set to LINE)
Connectors:
XLR-3-31 equivalent(1: GND, 2: HOT, 3: COLD)
Input impedance: 9 kΩ or higher
Nominal input level: +4 dBu (GAIN setting at minimum)
Maximum input level: +24 dBu
Minimum input level: -53 dBu
Line input (unbalanced): MIC/EXT IN jack (can provide plug-
in power)
Connector: 3.5mm (1/8”) stereo mini jack
Input impedance: 10 kΩ or higher (when plug-in power is off)
1.8 kΩ or higher (when plug-in power is on)
Nominal input level: −20 dBV (GAIN setting at minimum)
Maximum input level: 0 dBV
Minimum input level: −67 dBV
Analog audio output
Line output (unbalanced): LINE OUT jack
Connector: 3.5mm (1/8”) stereo mini jack
Output impedance: 210 Ω
Nominal output level: −14 dBV
Maximum output level: +6 dBV
o 0dBu=0.775Vrms
o 0dBV=1Vrms
Headphone output: headphone jack
Connector: 3.5mm (1/8”) stereo mini jack
Maximum output: 45mW + 45mW (THD+N 0.1% or less, into 32 Ω
load)
Built-in speaker
0.4 W (mono)
USB
Port: USB Type-C
Transfer mode: USB 2.0 Hi-Speed
Device classes: mass storage, USB audio 2.0 (USB class compliant)
USB audio
Sampling frequencies
44.1, 48, 96 kHz
Quantization bit depth: 24-bit
Number of input channels: 6 (output from unit)
Number of output channels: 2 (input to unit)
Bluetooth device connector
For Bluetooth adapter (AK-BT1) only
Audio performance
Mic amp EIN (equivalent input noise)
−125 dBu or less
Frequency response
Input jacks 3/4 to PCM data
20 Hz – 20 kHz at 48 kHz: +0/-0.3 dB (JEITA)
20 Hz – 40 kHz at 96 kHz: +0/-0.7 dB (JEITA)
Dynamic range
Input jacks 3/4 to PCM data (20kHz SPCL LPF, A-weighting)
112 dB or higher (at 48 kHz)
112 dB or higher (at 96 kHz)
Total harmonic distortion ratio (THD+N)
Input jacks 3/4 (LINE IN) to PCM data, 1kHz sine wave,−5 dBFS input,
GAIN at minimum, 20kHz SPCL LPF
0.008% or less
Input jacks 3/4 (MIC IN) to PCM data, 1kHz sine wave,−5 dBFS input,
GAIN at minimum, 20kHz SPCL LPF
0.006% or less
Note: JEITA indicates conformance to JEITA CP-2150
Recording times (in hours: minutes)
File format (recording setting)
Card capacity
32GB
(microSDHC)
128GB
(microSDXC)
320kbps MP3 (stereo)
44.1kHz
222:13 888:53
16-bit WAV (stereo) 50:23 201:33
24-bit WAV (stereo) 96kHz 15:25 61:43
32-bit float WAV (stereo) 96kHz 11:34 46:16
o The recording times shown above are estimates. They might differ
depending on the microSD card in use.
o The recording times shown above are not continuous recording
times, but rather they are the total possible recording times for the
microSD card.
o If recorded in mono, maximum recording times will be about double
those above.
o If using dual recording, maximum recording times will be shorter
than those above.