Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 107
Global section
107
En
•
Pad 1 is in the oldest starting position of the saved patterns and pad 16 is in
the newest one.
(1) The pattern length to preview
(2) The position where the preview starts
4 Press the
[PATTERN]
button.
The button lights up in green and the 16-pads shows the pattern state of the
current track. The 16-pads of the current pattern lights up brightly. The pads
with saved patterns are dimly lit. The pads do not light up when there are no
saved patterns.
5 Press the desired pad to save the pattern being previewed to.
The pattern is saved and the pressed pad lights up.
•
A pattern cannot be saved to a pad with the current pattern.
•
To return to Time Warp mode without saving the pattern, press the
[PATTERN]
button again so that the button light dims.