Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 76)

Step edit section
76
En
Initializing a step
1 Press the [TRIGGER] button, or hold down the [SHIFT] button and
press the [TRIGGER] button.
The 16-pads switches to Trigger mode or CC mode.
2 Hold down the [COPY] and [PASTE] buttons and press the pad of
the step you want to initialize.
The step is initialized and the pad lights dimly.
• In Trigger mode, various parameters are initialized as follows.
PITCH value:
Note number 60
GATE value: 1.000 step
VELOCITY value: 100
COUNT value:
1
DIVIDE value: 1
Trigger: Mute
Tie: Disabled
CV Slide: Disabled
Active: Active
Harmonizer: Disabled
• In CC mode, various parameters are initialized as follows.
CC1 control value: 0
CC2 control value: 0
CC3 control value: 0
CC4 control value: 0
CC5 control value: 0
CC:
Mute
Active: Active