Signal conversion function, Timing clock rate conversion, Connecting to external equipment – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 169
Connecting to external equipment
169
En
Signal conversion function
The unit is provided with the following signal conversion function.
•
Timing clock rate conversion
•
CV/GATE conversion
Timing clock rate conversion
Convert the timing clock received by the input terminal set on
[Sync
Source]
of
[Sync Common]
setting in the GLOBAL menu to a
different timing clock format and output from each of the output
terminals (USB, MIDI, DIN SYNC, and CLOCK).
Timing clock rate settable in Sync mode of each of the input and output
terminals (USB, MIDI, DIN SYNC, and CLOCK) are as follows.
(The default setting is shown with *.)
•
USB-B:
24 ppqn (Fixed)
•
MIDI IN:
24 ppqn (Fixed)
•
MIDI OUT1:
24 ppqn (Fixed)
•
MIDI THRU/OUT2:
24 ppqn (Fixed)
•
DIN SYNC OUT1:
[24ppqn]
*,
[48ppqn]
•
DIN SYNC IN/OUT2:
[24ppqn]
*,
[48ppqn]
•
CLOCK IN:
[1ppqn]
,
[2ppqn]
,
[4ppqn]
,
[24ppqn]
*,
[48ppqn]
•
CLOCK OUT:
[1ppqn]
,
[2ppqn]
,
[4ppqn]
,
[24ppqn]
*,
[48ppqn]
For the timing clock rate settings of DIN SYNC and CLOCK, refer to the
following.
– “[DIN SYNC] setting” (page 125)
– “[CLOCK] setting” (page 128)