Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 74)

Step edit section
74
En
Copying/Pasting patterns
1 Press the [PATTERN] button.
The 16-pads switches to Pattern mode.
2 Hold down the [COPY] button and press the pad that you want to
copy.
The pad that is copied lights up in blue.
3 Hold down the [PASTE] button and press the pad to paste to.
The pad that is pasted lights up in blue.
Copying/Pasting notes
1 Press the [SCALE] button or press the [SCALE] button while
holding down the [SHIFT] button.
The 16-pads switches to Scale mode or Chord mode.
You can also use Scale mode or Chord mode to copy the note.
2 Hold down the [COPY] button and press the pad that you want to
copy.
The pad that is copied lights up in blue.
• If you are copying multiple pads in Scale mode, hold down the [COPY]
button and press all the pads to copy at the same time.
3 Press the [TRIGGER] button.
The 16-pads switches to Trigger mode.
4 Hold down the [PASTE] button and press the pad to paste to.
The pad which is pasted lights up in blue and the note on the copied pad is
overwritten.
• When copying more than one pad, all notes set on the copied pad are
overwritten on the pasted pads as chords.