Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 75)

Step edit section
75
En
DELETE
If you hold down the [COPY] and [PASTE] buttons and perform certain
operations, the following functions can be activated.
• Deleting the automation (Transpose, Groove Bend, Speed Control,
Rhythmic Control) recorded on the sequence
• Initializing the step
• Deleting the pattern
• Deleting the pattern set
• Deleting the note
Deleting the automation recorded on the sequence
1 Press the [COPY] and [PASTE] buttons.
When both buttons are pressed, deleting mode is enabled and all function
buttons with automation recorded flashes. The
[AUTOMATION ON] indicator
flashes in the case of Groove Bend. The item on which automation is recorded
is highlighted on the display.
2 Press one of the buttons for the function to delete the automation or
move the [GROOVE BEND] slider in the case of Groove Bend.
The automation of the pressed button is deleted and the light of the button
turns off. The
[AUTOMATION ON] indicator turns off in the case of Groove
Bend.